Ricoh LD435c - Manual (Page 242)

Registering Addresses and Users for Facsimile/Scanner Functions
234
7
To program the SUB Code
A
Press [Adv. Features], and then press [SUB Code].
B
Press [Change] under TX SUB Code.
C
Enter the SUB Code, and then press [OK].
D
To enter a password, press [Change] under Password (SID).
E
Enter a password using the number keys, and then press [OK].
F
Press [OK].
To program the SEP Code
A
Press [Adv. Features], and then press [SUB Code].
B
Press [Change] under RX SEP Code.
C
Enter a SEP Code using the number keys, and then press [OK].
D
To enter a password, press [Change] under Password (PWD).
E
Enter a password using the number keys, and then press [OK].
F
Press [OK].
To set the International TX Mode
A
Press [Change] under International TX Mode.
B
Select [Off] or [On], and then press [OK].
To select the fax header
A
Press [Change] under Fax Header.
B
Select [1st Name] or [2nd Name], and then press [OK].