Output tray settings – Ricoh LD435c User Manual

Page 58

Advertising
background image

System Settings

50

2

Output: Printer (printer)

Specify a tray to which documents are delivered.
The output trays set on the printer driver have priority over the output tray
specified below.
Internal Tray 1
• Internal Tray 2
• Finisher Upper Tray
• Finisher Shift Tray

System Status/Job List Display Time

Specify how long to display the System Status and Job List display for.
On: 60 second(s)
• Off
By selecting [On], you can specify a display time between 10 and 999 seconds.

Key Repeat

You can enable or disable repetition of an operation if a key on the screen or
control panel is pressed continuously.
• Off
Normal
• Repeat Time: Medium
• Repeat Time: Long

Note

❒ If the Panel Tone setting is [Off], the beeper does not sound, whatever the Warm

Up Notice setting.

❒ The Function Reset Timer setting is ignored if Interleave is set for Print Priority.

Reference

p.3 “Accessing User Tools”
"Function Compatibility", Copy/Document Server Reference

Output tray settings

Important

❒ You cannot interrupt the current stapling job even if a stapling job is specified

by a different function.

❒ When the 1000-sheet finisher, 3000-sheet finisher, or booklet finisher is in-

stalled and Staple or Shift Sort is specified for a job, the job will be delivered
to the finisher shift tray regardless of the output tray specified.

Advertising