Runco 3DIMENSION D-73D - Manual (Page 117)

Maintenance and Troubleshooting
D-73d Series Installation/Operation Manual 101
PRE
L
IMINAR
Y
AutoScope lens motor doesn’t
work. • The motor is not plugged in
or the AC outlet is not
active.
• The motor is not connected
to the trigger output on the
projector.
• Ensure that the motor is
plugged in and that the AC
outlet is active.
• Check the trigger
connection between the
lens motor and projector
(Figure 3-8).
Table 5-1. Troubleshooting Chart (continued)
Symptom Possible Cause(s) Solution