Runco 3DIMENSION D-73D - Manual (Page 61)

Installation
D-73d Series Installation/Operation Manual 45
PRE
L
IMINAR
Y
Ethernet Network Connection: Use a standard, Category 5 network cable with an
RJ-45 plug to connect a network hub, router or gateway to the Ethernet port on the
Primary DHD Controller; see Figure 3-20.
For more information about configuring and using this connection, refer to Network on
page 88.
Figure 3-20. Ethernet Network Connection to Primary DHD Controller
H
HDMI 4
HDMI 3
HDMI Out
Audio Only
HDMI Out
To Display
Ethernet PC / Control
RS232
Display Control
IR
H H
HDMI 4
HDMI 3
HDMI Out
Audio Only
HDMI Out
To Display
PC / Control
RS232
Display Control
IR
1 8
to Ethernet
Hub, Router
or Gateway
1 Transmit Data +
2 Transmit Data -
3 Receive Data +
6 Receive Data -