Pre l iminar y – Runco 3DIMENSION D-73D User Manual
Page 132
116
D-73d Series Installation/Operation Manual
PRE
L
IMINAR
Y
Light Output:
2D Content:
CSMS Specifications* – Home Theater Calibration:
450 ANSI Lumens; 29 Foot-Lamberts (fL)
Uncalibrated: 700 ANSI Lumens
3D Content:
CSMS-3D Specifications** – Home Theater Calibration:
311 ANSI Lumens; 20 Foot-Lamberts (fL)
Uncalibrated: 483 ANSI Lumens
Light output will drop less than 10% over the life of the
product.
*Measured on a 1.3 gain, 72" wide 16:9 screen
**Measured on a 3.0 gain, 73" wide 16:9 screen
Contrast Ratio:
CSMS* Contrast Ratio: 330:1
3 settings: Infinity:1, 20,000:1, and 10,000:1 (sequential)
ColorContrast™ for up to 50% higher contrast by color
Illumination System:
InfiniLight™ LED (RGB) illumination system
Color Space:
135% NTSC color gamut in proprietary Runco Native mode
with Runco Smart Color™ and Personal Color Equalizer™.
Presets for SMPTE C, REC-709, DCI, EBU, and others. Adobe
achievable.
Maintenance:
Zero maintenance, solid state optical path (no lamps to
replace)
Power Requirements:
100 VAC to 240 VAC +/- 10% @ 50/60Hz
Power Consumption:
180 - 480 W typical (2W standby)
Operating Temperature:
10°C to 40°C, up to 7,500’ altitude
10°C to 35°C, 7,500’ to 10,000’ altitude
Operating Humidity:
10 - 80% humidity (non-condensing)
Dimensions:
Weight:
116 lbs. (52.62 kg)
Regulatory Approvals:
FCC Part 15 Class B, CE Class B, UL, cUL, CB, RoHS,
WEEE, local conformances as required
Limited Warranty:
Projector: (2) Two years parts and labor from the date of
shipment from Runco. Extended RuncoCare™, RedCarpet™,
and PremierCare™ assurance available.
Specifications are subject to change without notice.
Table 7-1. D-73d Projector Specifications (continued)