Runco 3DIMENSION D-73D - Manual (Page 98)

Operation
82 D-73d Series Installation/Operation Manual
PRE
L
IMINAR
Y
• Hue/Saturation/Level: PCE provides the ability to define a custom color gamut in
terms of primary (red, green and blue) and secondary (yellow, cyan and magenta)
color hues, saturation and level (brightness).
Each control operates only on the color specified. Surrounding colors are linearly
interpolated based on their distance from each of these colors. In the CIE 1931 Yxy
coordinate system (see Figure 4-8), Hue rotates the color coordinates around the
white point, Saturation adjusts the coordinate's distance from white and Level
adjusts the luminance (Y) of the color relative to white.
Figure 4-8. Effect of PCE Hue and Saturation Controls
• White Balance: To precisely adjust the white point associated with the custom
color gamut, choose White Balance from the PCE sub-menu. These controls
operate identically to the Gain controls in the Display Color - Common Settings
menu (described on page 79).
The DHD Controller uses the PCE settings for all display modes on
a given input.
Note
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Hue
Hu
e
Hu
e
Hu
e
Hu
e
Hu
e
Saturatio
n
Saturatio
n
Saturatio
n