Runco 3DIMENSION D-73D - Manual (Page 131)

D-73d Series Installation/Operation Manual 115
PRE
L
IMINAR
Y
7.1
D-73d Projector
Specifications Table 7-3 lists the D-73d projector specifications.
7. Specifications
Table 7-1. D-73d Projector Specifications
Projector Type: Texas Instruments Digital Light Processing™ (DLP) dual
imaging system, SuperOnyx™ DMD™
Native Resolution: Full HD 1920 x 1080 (1080p)
Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,
Native
3D Support: All HDMI 1.4a mandatory 3D formats are supported with
included Runco 3Dimension Processing system
DTV Compatibility: Refer to Table 7-2
Picture Size (16:9 Screen),
2D Content: Recommended Width: 72- 132 in.
Maximum Width: 200 in.
Picture Size (16:9 Screen),
3D Content: Recommended Width: 72- 100 in.
Maximum Width: 200 in.
Processing: Runco DHD4 Processor with ViVix IV™ technology and BRiC
(Backup, Recovery and Clone) tool
Control Options: • Serial commands via RS-232
• Discrete infrared (IR) remote
• Consumer Electronics Control (CEC) protocol support via
HDMI
• Ethernet
Inputs: Refer to Table 7-3
12V Output (for anamorphic
lens transport): +12 VDC, rated at 250 mA
Video Standards: NTSC, PAL, SECAM, CEA-861D
Calibration: ISF Certified Calibration Configuration
Color Gamut: Fully adjustable, > BT.709 (REC709)
Throw Distance
(Factor x Screen Width): Refer to Table 3-3
Horizontal & Vertical Offset: Refer to Table 3-4