Runco 3DIMENSION D-73D - Manual (Page 49)

Installation
D-73d Series Installation/Operation Manual 33
PRE
L
IMINAR
Y
Connecting the AutoScope Lens Motor to the Projector: Connect the AutoScope
lens transport motor to the 12-volt trigger output on the projector (labeled
CINEWIDE/AUTOSCOPE), as shown in Figure 3-8.
Figure 3-8. Connecting the AutoScope Lens Motor to the Projector
After you have installed the AutoScope lens motor, proceed with Mounting the D-73d
(page 36).
PRIMARY
PRIMARY
SECONDARY
SECONDARY
Anamorphic Lens Transport Motor
AC Input +12V
Trigger Input
Power
Switch
3.5-mm mini plug