Ricoh Type 480 - Manual (Page 33)

Sending Scan Files by E-mail
25
2
B Select the sender.
Note
❒ When a protection code has
been set, a screen for entering
the protection code appears
after selecting the sender. En-
ter the protection code, and
then press [OK]. If the protec-
tion code you entered is cor-
rect, the sender nam e is
displayed.
C Press [OK].
Using a registration number to
specify a sender name
A Press [Attach Sender's Name].
B Enter the five digit registration
number that has been assigned
to a destination folder using
the number keys.
If the entered number is less
than five digits, press the
{{{{#}}}}
key after the last number.
Example: To enter 00006
Press the
{{{{6}}}} key, and then
press the
{{{{#}}}} key.
Note
❒ When a protection code has
been set, a screen for entering
the protection code appears
after selecting the sender. En-
ter the protection code, and
then press [OK]. If the protec-
tion code you entered is cor-
rect, the sender name and
[Return Receipt]
are displayed.
C Press [OK].
Searching for a sender
A Press [Attach Sender's Name].
B Press [ ].