Ricoh Type 480 - Manual (Page 43)

Sending Scan Files by Scan to Folder
35
3
• Enter the path for the folder of a
client computer on the same
network directly.
• Specify the folder in the FTP
server.
• Select it from the client comput-
ers on the same network.
Note
❒ Destinations in the destination
list and registration numbers
must be registered in advance
in [System Settings]. For details,
see “System Settings”, General
Settings Guide.
❒ Depending on the security set-
tings, certain destinations may
not be displayed.
Selecting a destination folder
from the list
A Select the destination folder.
The selected folder is highlight-
ed and also is displayed in the
destination field at the top of the
screen.
Note
❒ If the target destination does
not appear, take one of the
following steps:
• Display the destination by
selecting its initial letter
from the title.
• Display the destination by
pressing [
U U U U] or [T T T T].
❒ If a protection code has been
set for the shared folder, a
screen for entering the pro-
tection code appears.
B To select more destination fold-
ers, repeat step
A A A A.
Note
❒ To deselect a destination, press
the destination once more, or
press [
U U U UPrev.] or [T T T TNext] to
display the destination in the
destination field, and then
press the
{{{{Clear/Stop}}}} key.
Using a registration number to
select a destination folder
A Press [Registration No.].
B Enter the five digit registration
number that has been assigned
to a destination folder using
the number keys.
If the entered number is less
than five digits, press the
{{{{#}}}}
key after the last number.
Example: To enter 00004
Press the
{{{{4}}}} key, and then
press the
{{{{#}}}} key.
Note
❒ If a protection code has been
set for the shared folder, a
screen for entering the pro-
tection code appears.
C To select more destination fold-
ers, repeat step
B B B B.