Ricoh Type 480 User Manual
Page 95
When a Message Is Displayed
87
8
Connection with LDAP server has
failed. Check the server status.
A network error has occurred and
connection has failed. Try the opera-
tion once more. If the message is still
shown, the network may be crowd-
ed. Check the information of System
Settings. See "User Tools (System
Settings)", General Settings Guide.
Connection with the destination has
failed. Check the status and connec-
tion. To check the current status,
press [Scanned Files Status].
• Check the network settings of the
client computer.
• Check that components such as
the LAN cable are connected
properly.
• Check that the server settings are
correct and the server is working
properly.
Entered protection code for destina-
tion is incorrect. Please re-enter.
Make sure the protection code is cor-
rect, and then enter it again. See
"Registering a Protection Code",
General Settings Guide.
Exceeded max. data capacity. Original
Orientation to
, then press the
Start key again.
• Reload the original in the orienta-
tion of
.
• If you select an original loading
orientation other than
, the
machine may not be able to scan
the original with high resolution.
seep.105 “Relationship between
Resolution and original size”.
Exceeded max. E-mail size. Sending E-
mail has been cancelled. Check [Max.
E-mail Size] in Scanner Features.
• Increase the size of [Max. E-mail Size].
• Set [Divide & Send E-mail] to [Yes
(per page)]
or [Yes (per max. size)].
Exceeded max. file capacity. Delete
the unnecessary stored files.
For details about the maximum
number of files that can be stored,
see p.114 “Store”. Reduce the
number of stored files for transmis-
sion or delete unnecessary stored
files.
Exceeded max. No. of search results
which can be displayed.
Max.: nnn
Note
❒ “nnn” in the message represents a changeable
number.
Search again after changing the
search conditions.
Message
Causes and solutions