Ricoh Type 480 - Manual (Page 82)

Configuring/Registering Scan Settings
74
7
❖ ❖ ❖ ❖ Scan Size
Select the size of the original to
be scanned.
When [Auto Detect] is selected,
the auto detect function of the
machine is used to set the origi-
nal size.
If you select [Custom Size], you
can specify the vertical and hor-
i z o n t a l d i m e n s i o n s o f t h e
scanned area in millimeters. Al-
ternatively, specify the horizon-
tal dimension only, and then set
the vertical dimension using
[Auto Detect]
.
Reference
For details about operations
under [Custom Size], see p.99
“Selecting a custom size”.
When the size is specified, scan-
ning is performed for that size,
regardless of the actual size of
the original. The following sizes
can be selected:
A0
R, A1RS, A2RS,
A3
RS, A4RS,B1R,
B2
RS,B3RS,B4RS,
36
× 48 inchR,
34
× 44 inchR,
30
× 42 inchR,
24
× 36 inchRS,
22
× 34 inchRS,
18
× 24 inchRS,
17
× 22 inchRS,
12
× 18 inchRS,
11
× 17 inchRS,
8 1 /
2
× 14 inchRS,
9
× 12 inchRS,
8 1 /
2
× 11 inchRS
❖ ❖ ❖ ❖ Edit
Make editing settings.
• Erase Border
Delete the borders of the
scanned original according
to the width specified.
If you select [Same Width], you
c a n s p ec i fy , m i lli m et ers
(inches), a uniform width for
deleting all sides (top, bot-
tom, left, and right). If you
select [Diff. Width], you can
specify, millimeters (inches),
a different width for deleting
each side. You can specify a
value between 2 and 99 mil-
limeters (0.1 and 3.9 inches).
Limitation
❒ If you set [Scan Size] to [Au-
to Detect] , or select [Auto
Detect] for the vertical
length in [Custom Size],
[Erase Border]
becomes un-
available (If [Erase Border]
was selected beforehand,
[Erase Border]
is disabled).
• Positive / Negative
If you select [Positive / Nega-
tive]
, a black and white origi-
nal will produce a negative
scanned image.
Note
❒ If you select [Erase Border],
t h e d e l e t e d m a r g i n i s
made black.
• Mirror Image
If you select [Mirror Image], the
scanned image will be a mir-
ror image of the original.
CCCC
Press [OK].