Ricoh 220-240 V - Manual (Page 187)

Print Settings Menu
177
5
❖ Append CR to LF
You can specify whether or not to append a CR code to each LF code to
print text data clearly.
• Off
• On
Note
❒ Default: Off
❖ Resolution
You can specify the print resolution in dots per inch.
• 300 dpi
• 600 dpi
Note
❒ Default: 600 dpi
❖ PS Menu
You can set conditions when using Postscript for printing.
❖ Data Format
You can select the data format.
• Binary
• TBCP
This setting is effective when using a parallel, USB, or EtherTalk connec-
tion.
When you use a parallel or USB connection, the print job is canceled if bi-
nary data is sent from the printer driver.
When you use an Ethernet connection, the print job is canceled if:
• The printer driver data format is TBCP and the data format selected us-
ing the control panel is Binary Data.
• The printer driver data format is binary and the data format selected us-
ing the control panel is TBCP.
Note
❒ Default: TBCP
❖ Resolution
You can select the resolution.
• 600dpi Fast
• 600dpi Standard
• 1200dpi
Note
❒ Default: 600dpi Fast