Ricoh 220-240 V - Manual (Page 243)

Remote Maintenance by telnet
233
6
ipv6
Use the “ipv6” command to display and configure IPv6 settings.
❖ View Setting
msh> ipv6
❖ IPv6 stateless address
msh> ipv6 stateless {on|off}
lpr
Use the “lpr” command to view and configure LPR settings.
❖ View Setting
msh> lpr
❖ Checking host name when deleting the job
msh> lpr chkhost {on|off}
netware
Use the “netware” command to configure the NetWare settings such as the print
server name or file server name.
❖ Netware Printer Server Names
msh> netware pname “character string”
• Enter the NetWare print server name using up to 47 characters.
❖ Netware File Server Names
msh> netware fname
• Enter the NetWare file server name using up to 47 characters.
❖ Encap type
msh> netware encap {802.3|802.2|snap|ethernet2|auto}
❖ Remote Printer Number
msh> netware rnum {0–254}
❖ Timeout
msh> netware timeout {3–255}
❖ Printer server mode
msh> netware mode pserver
msh> netware mode ps
❖ Remote printer mode
msh> netware mode rprinter
msh> netware mode rp