Ricoh 220-240 V - Manual (Page 324)

Mac OS Configuration
314
9
Duplex Printing
Use this function to select duplex printing.
Important
❒ To use this function, the optional duplex unit must be installed on the printer.
The following table shows the tabs or menus where you can select this function.
❖ None
Disables duplex printing.
❖ Flip on Long Edge
Prints so you can open it to the long edge when bound along the long edge.
❖ Flip on Short Edge
Prints so you can open it to the short edge when bound along the short edge.
Color Mode
Use this function to select whether the document is printed in color or black and
white.
The following table shows the tabs or menus where you can select this function.
❖ Color
Prints color documents in full color.
Note
❒ Color images are printed using CMYK toner, Cyan, Magenta, Yellow, and
Black. CMYK represents the three primary subtractive colors.
❒ If you want to adjust the print color, use the settings in the Advanced dia-
log box accessed from the Advanced button on the [Print Quality] tab.
❖ Black and White
Prints everything, including color documents, in black and white. Black and
White printing is faster than Color. To stop black and white areas being print-
ed with CMYK toner, select [Black and White] in the printer driver as well as in
the application.
Mac OS [Print on Both Sides] on [Layout] in the print dialog box.
Mac OS X • 10.3 or higher
The [Two Sided Printing] check box on [Layout] in the print dialog box.
• Other Mac OS X
The [Print on both Sides] check box on [Duplex] in the print dialog box.
Mac OS [Color Mode] on [Printer Specific Options] in the print dialog box.
Mac OS X [Color Mode] on the [Features x] tab on [Printer Features] in the print dia-
log box.