Ricoh 220-240 V - Manual (Page 220)

Monitoring and Configuring the Printer
210
6
Checking the Printer Status
Follow the procedure below to check printer status.
A
Start SmartDeviceMonitor for Admin.
B
On the [Group] menu, point to [Search Device<TCP/IP>], and then click [TCP/IP],
[IPX/SPX] or [TCP/IP SNMPv3].
The status of printers is indicated by icons in the list.
If you are using TCP/IP SNMPv3, enter the user authentication.
C
To obtain status details, click the printer in the list, and then click [Open] on
the [Device] menu.
The printer status appears in the dialog box.
D
Click [System] or [Printer].
The printer status appears in the dialog box.
E
Quit SmartDeviceMonitor for Admin.
Note
❒ For details about status icons and items in the dialog box, see SmartDevice-
Monitor for Admin Help.