Ricoh 220-240 V User Manual

Page 246

Advertising
background image

Monitoring and Configuring the Printer

236

6

Adding a specified IPv6 destination to Routing Table

msh> route add6 {destination} prefixlen gateway

• Specify the IPv6 address to destination and gateway.

Deleting a specified IPv6 destination from Routing Table

msh> route delete6 {destination} prefixlen

• Specify the IPv6 address to destination and gateway.

Display information about a specified IPv6 route information

msh> route get6 {destination}

• Specify the IPv6 address to destination and gateway.

Enabling/disabling a specified IPv6 destination

msh> route active6 {destination} prefixlen {on | off}

Route initialization

msh> route flush

Note

❒ The maximum number of IPv4 routing tables is 16.
❒ The maximum number of IPv6 routing tables is 2.
❒ Set a gateway address when communicating with devices on an external network.
❒ The same gateway address is shared by all interfaces.
❒ “Prefixlen” is a number between 1 and 128.

set

Use the "set" command to set the protocol information display "active" or "inac-
tive".

View settings

The following command displays protocol information (active/inactive).

msh> set ipv4

msh> set ipv6

msh> set appletalk

msh> set netware

msh> set smb

msh> set protocol

• When protocol is specified, information about TCP/IP, AppleTalk, Net-

ware, SCSI print, PictBridge and SMB appears.

msh> set parallel

msh> set usb

msh> set lpr

Advertising