Ricoh 220-240 V - Manual (Page 34)

Preparing for Printing
24
1
Installing the PostScript 3 Printer Driver (Windows XP, Windows
Server 2003 - TCP/IP)
Important
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local printer attached to this computer.], and then click [Next >].
G
Click [Create a new port:].
H
Click [DeskTopBinder-SmartDeviceMonitor], and then click [Next >].
I
Click [TCP/IP], and then click [Search].
A list of printers using [TCP/IP] appears.
J
Select the printer you want to use, and then click [OK].
Only printers that respond to a broadcast from the computer appear. To use
a printer not listed here, click [Specify Address], and then enter the IPv4 ad-
dress or host name of the printer.
K
Check that the name of the printer whose driver you want to install is se-
lected, and then click [Next >].
L
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
M
Specify whether or not to print a test page, and then click [Next >].
N
Click [Finish].
The printer driver installation starts.