Appendix a – product specification – Rosewill ROUTERRNX EASYN400 User Manual
Page 101
Wireless Router
RNX-EasyN400 User Manual
100
Appendix A – Product Specification
Hardware Feature
Dimensions
125mm (L) x 98mm (W) x 25mm (H)
WAN: One 10/100 Fast Ethernet RJ-45
LAN: Four 10/100 Fast Ethernet RJ-45
Reset button
Power Jack
Physical Interface
WPS button (WiFi Protected Setup)
Power Status
WAN (Internet connection)
10/100Mbps LAN1~LAN4
LEDs Status
WLAN (Wireless connection)
Power Supply: 200 to 240 VDC ± 10％ (ETSI) 100 to 120 VDC ± 10％ (FCC)
Power Requirements
Device: 12V/1A
Reset Button
The reset button is built into the rear panel. Use this button to restore the RNX-
EasyN400 to its factory default settings. Press for 1 second to restart the device. Press
for 10 seconds to restore to factory default settings.
WPS button
Press the WPS on two WPS enabled devices within 120 seconds for a security-enabled
wireless connection.
Environment
Temperature Range
0 to 45° C - Operating, -10 to 70 ° C – Storage
Humidity (non-condensing)
15%～95% typical