Rosewill ROUTERRNX EASYN400 - Manual (Page 24)

Wireless Router RNX-EasyN400 User Manual
23
1. Click on Start > Control Panel > Network and Internet Connections > Network
connections.
2. Right-click on the Local Area Connection which represents your network card and
selects Properties.
3. Highlight Internet Protocol (TCP/IP) and click Properties.
4. Click to use the B section like below page. You will need to set IP address for default.
Example: If RNX-EasyN400’s LAN IP address is 192.168.0.1, make your IP address