Rosewill ROUTERRNX EASYN400 - Manual (Page 85)

Wireless Router RNX-EasyN400 User Manual
84
2. Right-click on the Local Area Connection which represents your network card and
selects Properties.
3. Highlight Internet Protocol (TCP/IP) and click Properties.
4. Click to use the B section like below page. You will need to set IP address for
default. Example: If RNX-EasyN400’s LAN IP address is 192.168.0.1, make your
IP address 192.168.0.X (X is a number between 100 and 200). Make sure that the
number you choose is not in use on the network. Set Subnet mask as 255.255.255.0.