Rosewill ROUTERRNX EASYN400 - Manual (Page 17)

Wireless Router RNX-EasyN400 User Manual
16
Click <Next> to enter mode selection.
2.3 Setup Wizard – Connect Mode Selection
This is where you select the mode that RNX-EasyN400 is going to be use and set its
configurations. You can choose AP Router Mode is when you want to set RNX-
EasyN400 as a wireless LAN administrator for your computer or gaming console to
connect to. Or you can choose AP Repeater mode is the WDS/Bridge mode which will
extend your wireless signal, but does not enable WAN interface. Setup Wizard will skip
WAN Configuration when you select this mode.
2.3.1 AP Router Mode
Click <Next>, Setup Wizard will automatically detect your Internet Network settings.