Rosewill ROUTERRNX EASYN400 - Manual (Page 108)

Wireless Router RNX-EasyN400 User Manual
107
with a battery for when power is lost, i.e. Time Warner Cable Modems, will
keep the modem on and connected. Due to the ADSL/Cable modem not
assigning the correct DHCP information, the Rosewill Routers can not work
correctly and assign a DHCP to the client computers.)
• Make sure you entered your ISP account information correctly in the wizard. These
fields are case-sensitive, so make sure [Caps Lock] is not on.
• If you are trying to access the Internet wirelessly, make sure the wireless settings in
the wireless client are the same as the settings in the Router Mode.
•
Follow the process of Section 1.7 on Page 7. Use cable to connect your
RNX-EasyN400, use web browser to link to RNX-EasyN400.
•
If your RNX-EasyN400 is being set as a repeater, you will need to
manually set your computer’s IP address. Please follow the steps in
Section 2.3.3 Connecting to RNX-EasyN400 in AP Repeater Mode on
Page 22.
• If the problem continues, contact your ISP.
Q: I cannot access the Internet anymore. I had access to the Internet (with the RNX-
EasyN400), but my Internet connection is not available anymore..
A: Check the hardware connections, and make sure the LEDs are behaving as expected.
• Reboot the RNX-EasyN400.
• If the problem continues, contact your ISP.
Q: My internet connection is slow.
A: There might be a lot of traffic on the network. Look at the LEDs, to see if RNX-
EasyN400 is transferring and receiving a lot of information. Try closing some programs
that use the Internet, especially peer-to-peer applications.
• Check the signal strength. If the signal strength is low, try moving the RNX-
EasyN400 closer to the AP if possible, and look around to see if there are any devices