Rosewill ROUTERRNX EASYN400 - Manual (Page 57)

Wireless Router RNX-EasyN400 User Manual
56
information when connecting to other WPS-enabled wireless devices.
SSID: This is the network broadcast name (SSID) of RNX-EasyN400.
Authentication Mode: It shows the active authentication mode for the wireless
connection.
Passphrase Key: It shows the passphrase key that is randomly generated by the wireless
router during the WPS process. You may need this information when using a device
which doesn’t support WPS.
WPS via Push Button: Press the button to start the WPS process. RNX-EasyN400 will
wait for the WPS request from the wireless devices within 2 minutes.
You can fill-in the PIN code of the wireless device and press the button to start the WPS
process. RNX-EasyN400 will wait for the WPS request from the wireless device within 2
minutes.
3.6.7 Client List
This WLAN Client Table shows which the Wireless client associate to this Wireless
Router.
3.6.8 Policy
This function gives you abilities to set up the Wireless Access Policy for RNX-EasyN400.
WAN Connection: Allow Wireless Client on specific SSID to access WAN port.