Rosewill ROUTERRNX EASYN400 - Manual (Page 109)

Wireless Router RNX-EasyN400 User Manual
108
that might be interfering with the wireless network (for example, microwaves, other
wireless networks, and so on).
• Reboot the RNX-EasyN400.
• Please update the Wireless Adapter’s Firmware of your Notebook and PC to the latest
version to ensure the best connection.
• You may consider to activate Qos function, please see section 3.8.7 Quality of
Service (QoS) on Page 69.
• If problem remainds, please contact the network administrator or Rosewill.
Q: I cannot access the RNX-EasyN400 or ping any computer from the WLAN (wireless
AP or router).
A: Make sure the wireless LAN is enabled on the RNX-EasyN400
• Make sure the wireless adapter on the wireless station is working properly.
• Make sure your Notebook’s wireless adapter has the most current firmware.
• Make sure the wireless adapter installed on your computer is IEEE 802.11
compatible and supports the same wireless standard as the RNX-EasyN400.
• Make sure your computer (with a wireless adapter installed) is within the
transmission range of the RNX-EasyN400.
• Check that both the RNX-EasyN400 and your wireless station are using the same
wireless and wireless security settings.
• Make sure traffic between the WLAN and the LAN is not blocked by the firewall on
the RNX-EasyN400.
• Make sure you allow the RNX-EasyN400 to be remotely accessed through the
WLAN interface. Check your remote management settings.