Rosewill ROUTERRNX EASYN400 - Manual (Page 107)

Wireless Router RNX-EasyN400 User Manual
106
• If you changed the IP address and have forgotten it, see the troubleshooting on how
to find the IP address of your RNX-EasyN400.
• Make sure your Internet browser does not block pop-up windows and has JavaScripts
and Java enabled.
• Reset the device to its factory defaults, and try to access the RNX-EasyN400 with the
default IP address
• If the problem continues, contact the network administrator or Rosewill.
Q: I can see the Login screen, but I cannot log in to the RNX-EasyN400.
A: Make sure you have entered the password correctly. The default password is admin.
This field is case-sensitive, so make sure [Caps Lock] is not on.
• You cannot log in to the Web Configurator while someone is using Telnet to access
the RNX-EasyN400. Log out of the RNX-EasyN400 in the other session, or ask the
person who is logged in to log out.
• This can happen when you fail to log out properly from your last session. Try logging
in again after 5 minutes.
• Disconnect and re-connect the power adaptor or cord to the RNX-EasyN400.
• If this does not work, you have to reset the device to its factory defaults.
Q: I cannot access the Internet.
A: Check the hardware connections, and make sure the LEDs are behaving as expected.
• Please follow the steps below to make sure the RNX-EasyN400 is connected with the
modem.
„ Configure your settings correctly i.e. DHCP, SSID, Password.
„
Save your settings.
„
Reboot your Rosewill Router and your ADSL/Cable modem.
„
If rebooting your ADSL/Cable modem doesn’t work, please call your
ADSL/Cable provider and ask them to reset and restart your ADSL/Cable
Modem. (This is due to some newer ADSL/Cable modems are now equipped