Rosewill ROUTERRNX EASYN400 User Manual

Page 95

Advertising
background image

Wireless Router

RNX-EasyN400 User Manual

94

Mode: This is predefined as Repeater.

Band: Depending on the wireless router you want to connect to, you will need to adjust

the band accordingly to the wireless router.

Enable SSID #: By default, RNX-EasyN400 has 1 set of SSID in Repeater mode.

However, you can add two more SSIDs for your designate groups to link to.

SSID 1: This is the default SSID #. It will automatically adjust when you select your

desired signal to broadcast.

SSID 2: When you add the second SSID. You will see this option where you can enter

your desired SSID 2 name.

SSID 3: When you add the third SSID. You will see this option where you can enter your

desired SSID 3 name.

Site Survey: Once click this option, you will see a popup page which scan through your

local wireless signal. Below is the popup sample page which you will see.

Once you selected the SSID which you want to connect to, you will be ask

for the password depending on your setting in the wireless router you want

to connect to.

Advertising