Rosewill ROUTERRNX EASYN400 - Manual (Page 9)

Wireless Router RNX-EasyN400 User Manual
8
Blinking RNX-EasyN400 is sending/receiving data through WAN
Off The WAN is not ready or fail
On RNX-EasyN400 has a successful Ethernet connection.
Blinking
RNX-EasyN400 is sending/receiving data through LAN
port
LAN 1~4 port Blue
Off The LAN is not ready or fail
WPS
Press this button for 1 second to set up a wireless connection via WiFi Protected Setup with
another WPS-enabled client. You must press the WPS button on the client side within 120
seconds for a successful connection.
1.5 Network + System Requirements
To begin using the RNX-EasyN400, make sure you meet the following as minimum
requirements:
h PC/Notebook.
h Operating System – Microsoft Windows 98SE/ME/XP/2000/VISTA
h 1 Free Ethernet port.
h WiFi card/USB dongle (802.11b/g/n) – optional.
h External xDSL (ADSL) or Cable modem with an Ethernet port (RJ-45).
h PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera etc.)
h Few Ethernet compatible CAT5 cables.
1.6 RNX-EasyN400 Placement
We suggest that you can place RNX-EasyN400 on a desk or other flat surface, or you can
mount it on a wall, however, for optimal performance, place your RNX-EasyN400 in the
center of your office (or your home) that is away from any potential source of
interference, such as a metal wall or microwave oven. This location must be close to a
power connection and your ADSL/Cable modem. If the antennas are not positioned
correctly, performance loss may occur.