Rosewill ROUTERRNX EASYN400 - Manual (Page 56)

Wireless Router RNX-EasyN400 User Manual
55
3.6.6 WPS (Wi-Fi Protected Setup)
WPS is the simplest way to establish a connection between the wireless clients and the
wireless router. You don’t have to select the encryption mode and fill in a long
encryption passphrase every time when you try to setup a wireless connection. You only
need to press a button on both wireless client and wireless router, and the WPS will do
the rest for you.
The wireless router supports two types of WPS: WPS via Push Button and WPS via PIN
code. If you want to use the Push Button, you have to push a specific button on the
wireless client or in the utility of the wireless client to start the WPS mode, and switch
the wireless router to WPS mode. You can simply push the WPS button of the wireless
router, or click the ‘Start to Process’ button in the web configuration interface. If you
want to use the PIN code, you have to know the PIN code of the wireless client and
switch it to WPS mode, then fill-in the PIN code of the wireless client through the web
configuration interface of the wireless router.
WPS: Check the box to enable WPS function and uncheck it to disable the WPS function.
WPS Current Status: If the wireless security (encryption) function of this wireless
router is properly set, you’ll see a “Configured” message here. Otherwise, you’ll see
“UnConfigured”.
Self Pin Code: This is the WPS PIN code of the wireless router. You may need this