Rosewill ROUTERRNX EASYN400 - Manual (Page 32)

Wireless Router RNX-EasyN400 User Manual
31
3.2.2.1 RNX-EasyN400 Side Menu Description Table – AP Repeater Mode
LABEL DESCRIPTION
Status This shows the RNX-EasyN400’s general device, system and interface status
information.
LAN This is where you can configure LAN IP address, subnet mask, also to enable DHCP
server and IP range.
Schedule This is where you can set to schedule your wireless internet service
Log This is where RNX-EasyN400 stores the event log file based on the process.
Monitor You will see graphical diagrams showing the Bandwidth for WAN and WLAN.
System
(For detail,
please see
Page 94.)
Language You can select to have other language.
Wizard
(For detail, please see Page
100.)
You will be guide to setup your router based on a step by step process to either AP
router mode or AP Repeater mode.
Basic This is where you can set wireless Radio, Mode, Band, SSID, and Channel.
Client List You can find out here which Wireless client that is associating with the Wireless
router.
Wireless
(For detail,
please see
Page 100.) Policy This page is where you can set up the Wireless Access Policy.
Tools Admin You can change the password required to log into the broadband router's system