Omron NT20M - Manual (Page 31)

27
1, 2, 3... 1. Press MODIFY. The cross-shaped cursor will be displayed.
2. Line up the center of the cross-shaped cursor with the string you want to
change, and press the Enter Key. The character which you have se-
lected will be outlined by a guide box, and at the right of the screen a
box will be displayed for you to select the items to be modified.
3. Use the Up and Down Keys to select the item to modified, and then
press the Enter Key. You can return to step 2 by pressing the Escape
Key. For items selected for change, data input methods are the same as
when the string was created.
4. To end the modification, press the Escape Key. A message will appear
asking whether you want to save the modified contents.
5. Press the Enter Key to save any changes made, or if you do not wish to
save the modified contents, press the Space Key to cancel all modifica-
tions and restore the previous data.
6. To return to step 3, press the Escape Key.
The procedure for modifying data with the Edit Display is the same as that for
other functions such as numeral and character displays.
Inputting Character Strings Section 2-1