Omron NT20M - Manual (Page 56)

52
2-6-1 Creating Normal Bar Graphs
If you select BAR GRPH from the Initial Edit Display, the Initial Bar Graph
Display will appear.
Initial Bar Graph Display
A bar graph is set by designating both ends (the starting and ending points)
of a diagonal line across the bar graph. It makes no difference whether the
display position of a bar graph is designated from the right or left, or from the
top or bottom. The ending point designates only the length (along the X axis)
of the bar graph. Whether the bar is vertical or horizontal is designated next
in the display settings.
2 bits or 255 dots (set with display setting) BAR GRAPH
Starting point
Ending point
1, 2, 3... 1. Designate the starting point.
2. Designate the ending point.
Designating Display
Position
Bar Graphs Section 2-6