Oracle Audio Technologies E10898-02 User Manual
Page 46
Creating a Shared Virtual Disk for Live Migration
6-2
Oracle VM Server User's Guide
This command returns output similar to:
10.1.1.1:3260,5 iqn.1992-04.com.emc:cx.apm00070202838.a2
10.1.1.1:3260,6 iqn.1992-04.com.emc:cx.apm00070202838.a3
10.2.1.250:3260,4 iqn.1992-04.com.emc:cx.apm00070202838.b1
10.1.0.249:3260,1 iqn.1992-04.com.emc:cx.apm00070202838.a0
10.1.1.249:3260,2 iqn.1992-04.com.emc:cx.apm00070202838.a1
10.2.0.250:3260,3 iqn.1992-04.com.emc:cx.apm00070202838.b0
4.
Delete entries that you do not want to use, for example:
# iscsiadm -m node -p 10.2.0.250:3260,3 -T
iqn.1992-04.com.emc:cx.apm00070202838.b0 -o delete
# iscsiadm -m node -p 10.1.0.249:3260,1 -T
iqn.1992-04.com.emc:cx.apm00070202838.a0 -o delete
# iscsiadm -m node -p 10.2.1.250:3260,4 -T
iqn.1992-04.com.emc:cx.apm00070202838.b1 -o delete
# iscsiadm -m node -p 10.1.1.249:3260,2 -T
iqn.1992-04.com.emc:cx.apm00070202838.a1 -o delete
# iscsiadm -m node -p 10.0.1.249:3260,5 -T
iqn.1992-04.com.emc:cx.apm00070202838.a2 -o delete
5.
Verify that only the iSCSI targets you want to use for the server pool are visible:
# iscsiadm -m node
6.
Review the partitions by checking /proc/partitions:
# cat /proc/partitions
major minor #blocks name
8 0 71687372 sda
8 1 104391 sda1
8 2 71577607 sda2
253 0 70516736 dm-0
253 1 1048576 dm-1
7.
Restart the iSCSI service:
# service iscsi restart
8.
Review the partitions by checking /proc/partitions. A new device is listed.
# cat /proc/partitions
major minor #blocks name
8 0 71687372 sda
8 1 104391 sda1
8 2 71577607 sda2
253 0 70516736 dm-0
253 1 1048576 dm-1
8 16 1048576 sdb
9.
The new device can now be used.
# fdisk -l /dev/sdb
10.
Create a new directory named /etc/ocfs2 directory:
# mkdir /etc/ocfs2
11.
Create the OCSF2 configuration file as /etc/ocfs2/cluster.conf. The following is a
sample cluster.conf file:
node: