Quantum ATL M-Series - Manual (Page 108)

Chapter 5 Running Diagnostic Programs
Running the Move Medium Test
90 ATL M-Series User’s Guide
7 Press the Up and Down buttons to select the source element of
the cartridge.
8 When the flashing arrow is next to the desired source element,
press Select .
The GUI displays the Move Cartridge TO screen (see figure 51 ).
A flashing arrow indicates the currently selected destination
element.
Figure 51 Sample
Move Cartridge TO
Screen
9 If the library is an ATL M1500 in a multiple library stack or an
ATL M2500, press the Level button to select the level where the
desired destination element is located.
10 Press the Up and Down buttons to select the destination
element for the cartridge.
11 When the flashing arrow is next to the desired destination
element, press Select .
The GUI displays the Confirm Move Cartridge screen (see
figure 52 ).