Quantum ATL M-Series - Manual (Page 97)

Chapter 4 Performing Maintenance Operations
Cleaning a Tape Drive
ATL M-Series User’s Guide 79
Cleaning a Tape Drive
4
To clean a tape drive:
1 Access the Maintenance screen (see Accessing the Maintenance
Screen ).
2 Press Clean .
The GUI displays the Select Cleaning Cartridge screen (see
figure 41 ). A flashing arrow indicates the currently selected
source element.
Figure 41 Sample
Select Cleaning
Cartridge Screen
3 If the library is an ATL M1500 in a multiple library stack or an
ATL M2500, press the Level button to select the level where the
cleaning cartridge is located.
4 Press the Up and Down buttons to select the source element that
contains the cleaning cartridge.
5 When the flashing arrow is next to the source element that
contains the cleaning cartridge, press Select .
The GUI displays the Select Tape Drive screen (see figure 42 ). A
flashing arrow indicates the currently selected drive.