Quantum ATL M-Series - Manual (Page 42)

Chapter 2 Basic Operations
Using the Quick View Menu Screen
24 ATL M-Series User’s Guide
Turning Drive Power
On or Off (Quick
View Menu Screen)
2
The Drive Power option allows you to turn drive power on or off
from the GUI. Use this option to turn off drive power when you are
hot-swapping a tape drive.
Turning Drive Power On or Off in an ATL M1500 Library 2
To turn drive power on or off in an ATL M1500 library:
1 Access the Quick View Menu screen (see Accessing the Quick
View Menu Screen on page 20).
2 Press Drv Pwr .
The GUI displays the Tape Drive Power screen (see figure 16 ).
Figure 16 Sample
Tape Drive Power
Screen
3 Press the button that corresponds to the drive you wish to
power on or off: Drive 1 or Drive 2 .
Note: This option is available on both the Quick View Menu
screen and the Maintenance screen. To access this option
on the Maintenance screen, refer to Turning Drive Power
On or Off (Maintenance Screen) on page 81.