Quantum ATL M-Series - Manual (Page 74)

Chapter 3 Changing the Library Configuration
Changing a Tape Drive ID
56 ATL M-Series User’s Guide
Changing a Tape Drive ID
3
By default, the ATL M1500 tape drive SCSI IDs are set as follows:
• Drive 1 ID = 1
• Drive 2 ID = 2
The ATL M2500 tape drive SCSI IDs are set as follows:
• Drive 1 ID = 1
• Drive 2 ID = 2
• Drive 3 ID = 3
• Drive 4 ID = 4
• Drive 5 ID = 15
• Drive 6 ID = 14
Figure 38 illustrates the drive numbering scheme for the
ATL M2500.
Figure 38 ATL M2500
Drive Numbering
Drive 1 (default
SCSI ID = 1)
Drive 2 (default
SCSI ID = 2)
Drive 3 (default
SCSI ID = 3)
Drive 4 (default
SCSI ID = 4)
Drive 5 (default
SCSI ID = 15)
Drive 6 (default
SCSI ID = 14)