Quantum ATL M-Series - Manual (Page 55)

Chapter 2 Basic Operations
Using the Mailbox
ATL M-Series User’s Guide 37
Configuring the
Mailbox
2
By default, the Import/Export option is set to
MAP
. To change this
setting:
1 On the main screen, press Mailbox .
The GUI displays the Mailbox screen (see figure 22 ).
2 On the Mailbox screen, press Config .
The GUI displays the Configuration screen, with the Import/
Export option highlighted.
3 Use the Up and Down buttons to select the desired Import/
Export setting. The available settings are
None
,
1-Slot
,
10-Slot (or 12-Slot in LTO libraries), and MAP .
4 Press Select .
5 Press Main to return to the main screen.
Note: The default setting is MAP . For more information
about these settings, see Changing the Import/
Export Setting on page 69.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.
Note: You must reboot the library before this setting will
take effect.