Quantum ATL M-Series - Manual (Page 45)

Chapter 2 Basic Operations
Moving Tape Cartridges
ATL M-Series User’s Guide 27
The GUI displays the Move Cartridge FROM screen (see
figure 19 ). A flashing arrow indicates the currently selected
source element.
Figure 19 Sample
Move Cartridge FROM
Screen
3 If the library is an ATL M1500 in a multiple library stack or an
ATL M2500, press the Level button to select the level where the
desired source element is located.
4 Press the Up and Down buttons to select the source element of
the cartridge.
5 When the flashing arrow is next to the desired source element,
press Select .