Pipe material, size and insulator, Connecting drain pipe, Drain up – Toshiba RAV-SM2242DT-E User Manual
Page 20
– 19 –
Concealed Duct High Static Pressure
Installation Manual
Pipe material, size and insulator
The following materials for piping work and insulating process are procured locally.
Connecting drain pipe
REQUIREMENT
• Using adhesive agent for vinyl chloride, connect the hard vinyl chloride pipes certainly so that water does not leak.
• It takes some time to dry and indurate the adhesive agent. (Refer to the manual of adhesive agent.) Do not apply any extra
force on the connecting section until the adhesive agent dried.
Drain up
• When install the drain up kit of optional accessory, read the Installation Manual supplied to a drain up kit.
Pipe material
Hard vinyl chloride pipe socket for VP25
Hard vinyl chloride pipe VP25 (Nominal outer diameter Ø32mm)
Insulator
Foamed polyethylene foam, thickness: 10mm or more
19-EN