Texas Instruments TMS320TCI6486 - Manual (Page 130)

EMAC Port Registers www.ti.com
5.32 FIFO Control Register (FIFOCONTROL)
The FIFO control register (FIFOCONTROL) is shown in Figure 74 and described in Table 68 .
Figure 74. FIFO Control Register (FIFOCONTROL)
31 23 22 16
Reserved RXFIFOFLOWTHRESH
R-0 R/W-2
15 5 4 0
Reserved TXCELLTHRESH
R-0 R/W-24
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 68. FIFO Control Register (FIFOCONTROL) Field Descriptions
Bit Field Value Description
31-23 Reserved 0 Reserved
22-16 RXFIFOFLOWTHRESH Receive FIFO flow control threshold. Occupancy of the receive FIFO when Receive FIFO
flow control is triggered (if enabled). The default value is 0x2, which means that receive
FIFO flow control is triggered when the occupancy of the FIFO reaches two cells.
15-5 Reserved 0 Reserved
4-0 TXCELLTHRESH Transmit FIFO cell threshold. Indicates the number of 64-byte packet cells required to be
in the transmit FIFO before the packet transfer is initiated. Packets with fewer cells are
initiated when the complete packet is contained in the FIFO. This value must be greater
then or equal to 2 and less than or equal to 24.
130 C6472/TCI6486 EMAC/MDIO SPRUEF8F – March 2006 – Revised November 2010
Submit Documentation Feedback
Copyright © 2006–2010, Texas Instruments Incorporated