Texas Instruments TMS320TCI6486 - Manual (Page 17)

www.ti.com EMAC Functional Architecture
2.3 System-Level Connections
On the TCI6486/C6472 device, EMAC0 and EMAC1 support the following different types of interfaces to
physical layer devices (PHYs) or switches. Each EMAC can be configured to only one interface at any
given time. EMAC0 interface is selected by programming MACSEL0 [2:0] pins (see
Table 4 ) and EMAC1
interface is selected by programming MACSEL1 [1:0] pins (see Table 5 ).
Table 4. EMAC0 Interface Selection Pins
MACSEL0 [2:0] Interface
000 MII
001 RMII
010 GMII
011 RGMII
100 Not used
101 S3MII
110 Not used
111 Not used
Table 5. EMAC1 Interface Selection Pins
MACSEL1 [1:0] Interface
00 Not used
01 S3MII
10 RGMII
11 RMII
Table 6 explains the decoding of MACSEL0 [2:0], MACSEL1[1:0], and EMAC1_EN of the DEVCTL
register.
Table 6. MACSEL0[2:0], MACSEL1[1:0], and EMAC1_EN Decoding
MACSEL02 MACSEL01 MACSEL00 MACSEL11 MACSEL10 EMAC_EN EMAC0 EMAC1
0 0 0 X X 0 MII None
0 0 0 0 X 1 MII None
0 0 0 1 0 1 MII RGMII
0 1 0 X X 0 GMII None
0 1 0 0 X 1 GMII None
0 1 0 1 0 1 GMII RGMII
0 0 1 X X 0 RMII None
0 1 1 X X 0 RGMII None
1 0 0 X X 0 None None
1 0 1 X X 0 S3MII None
0 0 1 0 0 1 RMII None
0 0 1 0 1 1 RMII S3MII
0 0 1 1 0 1 RMII RGMII
0 0 1 1 1 1 RMII RMII
0 1 1 0 0 1 RGMII None
0 1 1 0 1 1 RGMII S3MII
0 1 1 1 0 1 RGMII RGMII
0 1 1 1 1 1 RGMII RMII
1 0 0 0 0 1 None None
1 0 0 0 1 1 None S3MII
1 0 0 1 0 1 None RGMII
17 SPRUEF8F – March 2006 – Revised November 2010 C6472/TCI6486 EMAC/MDIO
Submit Documentation Feedback
Copyright © 2006–2010, Texas Instruments Incorporated