2 raid : not optimal – Toshiba PORTEGE M400 User Manual
Page 131
3.3 Check of the RAID configuration
3 Tests and Diagnostics
3.3.3.2 RAID : not OPTIMAL
ABSENT or OFFLINE is displayed
When the “ABSENT” or “OFFLINE” is displayed as shown below, the drive is
removed by the RAID console and installed again. When the drive is unlocked,
“ABSENT” is displayed. When the drive is locked, “OFFLINE” is displayed.
Repair is not needed in this case.
TOSHIBA RAID / RAID Information Display Rev xx.xx.xxxx
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved.
Level
Status
Capacity
LD0 RAID-1 DEGRADE
xxGB
Write cache :
Enable
Degrade Bootup
:
Yes
MBR Protection
:
Disable
S.M.A.R.T
: Enable
Port Assign Status Size
Model
Rev
0 LD0-0 ONLINE xxGB FUJITSU---------- xxxxxxx
1 LD0-1
ABSENT xxGB FUJITSU---------- xxxxxxx
< RAID: not OPTIMAL >
PORTEGE M400 Maintenance Manual (960-541)
[CONFIDENTIAL]
3-13