Toshiba PORTEGE M400 - Manual (Page 268)

4 Replacement Procedures 4.10 Wireless LAN card
4-30 [CONFIDENTIAL] PORTEGE M400 Maintenance Manual (960-541)
Installing the Wireless LAN card
To install the Wireless LAN card, follow the steps below. (See Figure 4-17.)
CAUTION: Be sure to switch the computer off before installing the wireless LAN card.
Otherwise, the computer or the wireless LAN card may be damaged.
1. Insert the wireless LAN card to the connector slantwise and press it to connect
firmly.
2. Connect the wireless LAN antenna cables to the connectors on the wireless LAN
card and secure it with the following screw.
• M2.0×4.0B BIND
screw
×1
3. Install the metal plate in place and secure it with the following screw.
• M2.0×4.0B BIND screw or M2.0×4.0B TORX screw ×1
4. Stick the insulator (with the spacer).
CAUTION: 1. When replacing with a new insulator, a new spacer should be stuck to the
back of the insulator.
2. When keyboard supports (for the model of no wireless LAN) are stuck, the
spacer is not necessary.