Toshiba PORTEGE M400 - Manual (Page 283)

4.14 Cover latch 4 Replacement Procedures
4.14 Cover latch
Removing the Cover latch
The following describes the procedure for removing the cover latch. (See Figure 4-28.)
1. Remove the cover cap on the bottom while releasing latches.
2. Peel off the insulator on the cover latch.
3. Remove the cover latch to the direction in the figure below. Be careful not lose the
spring.
Cover cap
Cover latch
Insulator
Figure 4-28 Removing the Cover latch
Installing the Cover latch
The following describes the procedure for installing the cover latch (See Figure 4-28).
1. Install the cover latch and stick the insulator to the plates outside the spring.
(The insulator prevents the spring of cover latch from removing.)
2. Push the cover cap from the bottom.
PORTEGE M400 Maintenance Manual (960-541) [CONFIDENTIAL] 4-45