Toshiba PORTEGE M400 - Manual (Page 311)

4.26 Digitizer 4 Replacement Procedures
Removing the Digitizer
The following describes the procedure for removing the digitizer. (See Figure 4-47.)
1. Remove the following screws securing the digitizer.
• M2.0×4.0B BIND
screw
×2
2. Peel off two glass tapes.
3. Slide out the digitizer toward the arrow pointing.
M2.0x4.0B BIND
M2.0x4.0B BIND
Digitizer
Glass tape
Figure 4-47 Removing the digitizer
PORTEGE M400 Maintenance Manual (960-541) [CONFIDENTIAL] 4-73