Thermador MCES - Manual (Page 17)

17
This feature allows you to program the oven as a kitchen timer. It can also be used
to program a standing time after cooking is completed and/or to program a delay
start.
CAUTION:ĄIf oven lamp is lit while using the timer feature, the oven is incorrectly
programed. Stop oven immediately and reĆread instructions.
1. Press Timer Pad.
2. Enter the length of time to be counted down.
(up to 99 minutes and 99 seconds).
3. Press Start Pad.
Time will count down without oven operating.
1. Press Timer Pad.
2. Enter 80 minutes (using number pads).
3. Press P10
4. Enter 5 minutes (using number pads).
5. Press P6
6. Enter 20 minutes (using number pads).
7. Press Start Pad.
1. Press P3
2. Enter 25 minutes (using number pads).
3. Press Timer.
4. Enter 7 minutes (using number pads).
5. Press Start.
Cooking will start. After cooking, stand time will count down without oven
operating.
This feature allows you to set or add cooking time in 1 minute increments up to
10 minutes.
1. Press Quick Min until the desired cooking time (up to 10 minutes) appears in the
display window. Power Level is preĆset at P10.
2. Press Start
Cooking begins and the time will count down. At the end of cooking, 5 beeps
sound.
D If desired, you can use other power levels. Select desired power level before
setting cooking time.
D After setting the time by Quick Min Pad, you cannot use Number Pads.
D Quick Min Pad can be used to add more time during manual cooking.
To Set Timer
To Use as a Kitchen Timer
Example:
To count down 5 minutes
To set Delay Start
(2 or 3 programs)
e.g.
To set Stand Time
(2 or 3 programs)
e.g.
Quick Min Feature
To set Cooking Time
Notes