Toshiba VF-FS1 - Manual (Page 158)

E6581381
F-62
6
<Example of operation>
1) Output terminal function: 12 (OT) Over-torque detection
H = (Alarm only)
Time [sec]
H H
H
Torque current (%)
Over-torque
signal output
less than H H
ON OFF OFF
When H =  (tripping), the inverter will trip if over-torque lasts for the period of time set with
H
. In such a case, the over-torque signal remains ON.
2) Output terminal function: 20 (POT) Over-torque detection pre-alarm
H × 0.7−H
OFF ON OFF ON
H × 0.7
Torque current
(%)
Over-torque pre-alarm
Signal output
Time [sec]