Basic functions – UTStarcom CDM 1080 User Manual
ANSWERING A CALL
To answer a call, press any key except , ,
, , or .
To end the call, press .
In Auto Answer Mode, a call is automatically answered after a
preset number of ring tones. See page 71 for more details.
If one of the people you called hangs up during your call, you
and the remaining caller stay connected. If you initiated the call
and are the first to hang up, all three callers are disconnected.
l After pressing [MENU], select “Settings & Tools” followed
by . Select among “Flip Open”, “Any Key”, and
“Send Only” answering a call options. lf “Send Only” is
selected, the phone can only be answered by pressing .
See page 71 for more information.
With 3-Way Calling, you can talk to two people at the same time. When
using this feature, the normal airtime rates will be applied for each of the
Enter a number you wish to call then press .
Once you have established the connection,
enter the second number you wish to call then
When you’re connected to the second party,
press again to begin your 3-Way call.
Pauses are used for automated systems (i.e., voice mail, calling cards).
Insert a pause after a phone number then enter another group of
numbers. The second set of numbers is dialed automatically after the
pause. This feature is useful for dialing into systems that require a code.
To insert a wait/pause, enter a phone number
then press [OPTIONS]. Select either a Wait
(“W” appears) or a Pause (“P” appears).
Press to dial or to save.
Please refer to page 30 for more details about
storing a phone number.
Identifies caller by displaying their phone number. If the caller’s name
and number are already stored in your phone book, name or number
will appear. The caller ID is stored in the call history.
CALLER ID FUNCTION
Wait : Inserting a “Wait” means that the caller has to press
the “Send” key to send the DTMF tone before the
Pause : Inserting a “Pause” shall suspend the dialing for
2 seconds when it reaches the “Pause”.