UTStarcom CDM 1080 - Manual (Page 27)

C
H
4
51 50
C
H
4
SETTINGS SETTINGS
To select a ringer type for incoming calls:
CALL SOUNDS
2 Select your desired ringer type.
3 Select one of the available ring types.
To confirm, press [OK].
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Call Sounds”, then press “Call Ringtone”.
Up or Down key : Select “Ringer”.
Press Play/Pause to Play/Pause the ringer.
CALL RINGTONE
2 Select “On” or “Off”, then press [OK] to save it.
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Call Sounds”, then press “Call Vibrate”.
CALL VIBRATE
When selected, this setting alerts you to the following handset changes:
ALERT SOUNDS
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Alert Sounds”, then press “ERI Tones”.
ERI TONES
2 Select “Beep”, “Voice” or “Off”, then
press [OK] to save it.
1 Press [MENU], then select “Settings & Tools”
menu, then press “Sounds” then select
“Alert Sounds”, then press “TXT Message”.
TXT MESSAGE
2 Select “Tone”, “Vibrate” or “Reminder”, then
select one of the following options.
Tone : Select your desired ringer type.
Vibrate : Select “On” or “Off”.
Reminder : Select “Once”, “Every 2 Minutes”,
“Every 15 Minutes” or “Off”.
3 To save, press [OK].